avolites pearl expert titan 用户手册
Copyright Avolites Limited 2010
Page 90 – 8. Cue Lists
PearlExpertTitan_Man_v3.doc 29/03/2010 13:28:00
8.1
Create
8.1.1
Programming a cue-list
Programming a cue list is similar to recording a chase.
You need to set up the look on the stage for each cue and then add it
You need to set up the look on the stage for each cue and then add it
to the cue list. If you want to set fade times, you can either set them
while saving the cues or later.
1> Press the blue Chase button twice (or press Chase then [Create
Cue List]).
2> Press the blue Select button of the handle where you want to
store the Cue List (you can also store cue lists in the Playbacks
window).
3> Select the Record Mode of the console: by Fixture, Channel, or
Stage using softkey A. [Record Mode Stage] is safest as you are
sure to record the whole console output.
4> Set the default Fade and
Delay times, and
automatic cue linking,
using [Set Times]. These
settings will be allocated
to every new cue.
5> Set up the look for the
first cue, either manually
or by using “Include” on
existing cues. [Shape
Generator] allows you to
program shapes.
6> If you require a legend for
the cue, set it now using
Softkey C. You can also
change this later using
Unfold or Set Legend (see
next section).
7> Press the Select button of
the handle or [Append
Cue] to store the programmer contents as Cue 1 of the cue list.
8> Repeat from step 5 for the next cue. Do not press Clear in
between cues, unless you want levels to track through from
previous cues, as any faders moving to zero will not be stored.
If you do press clear, you must make sure that all channels you
want to record are selected or in the programmer (inverted
display).
9> Press Exit to finish when you have stored all the cues you want.
•
[Record Mode] lets you select Record By Fixture (all attributes
of any modified fixture are saved), Record By Channel (only
modified attributes are saved) or Record Stage (all fixtures with
a non-zero dimmer channel are saved). Record By Channel is
useful if you want to layer this cue list with other playbacks to
create an effect.
•
You can reopen the cue list to add more cues by repeating the
procedure above; this does not affect any cues already stored
in the cue list. While the cue list is open for editing: