Samsung bn68-01780j-00 用户手册

1.   Press the MENU button to display the menu. 

 

Press the 

ENtER  button, to select "Picture".

.   Press the ▲ or ▼ button to select "Picture Options", then press 

the 

ENtER  button.

.   Select the required option by pressing the ▲ or ▼ button, then 

press the 

ENtER  button.

.   When you are satisfied with your setting, press the ENtER  

button.

.   Press the EXIt button to exit.

In PC mode, you can only make changes to the “Colour 

Tone” and “Size” from among the items in “Picture Options”.

You can select the most comfortable colour tone to your eyes.

The adjusted values are stored according to the selected 

"Picture" mode.

When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.

You can select the picture size which best corresponds to your viewing requirements.

1:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.

Wide Zoom: Magnify the size of the picture more than 4:3.

Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.

:: This is the default setting for a video movie or normal broadcasting.

Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/

1080p) or Component (1080i/1080p) signals are input.

♦

♦

♦

♦

♦

In PC Mode, only "16:9" and "4:3" mode can be adjusted.

Settings can be adjusted and stored for each external device you have connected to an input of 

the TV.

Temporary image retention may occur when viewing a static image on the set for more than two 

hours.

"Wide Zoom": Move the screen up/down using the ▲ or ▼ button after selecting the   by 

pressing the ► or 

ENtER  button.

"Zoom": Select   by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up 

and down. After selecting  , use the ▲ or ▼ button to magnify or reduce the picture size in the 

vertical direction.

When Double ( 

 , 

 ) mode has been set in PIP, the Picture Size cannot be set.

After selecting “Just Scan” in hDMI (100i/100p) or Component (100i/100p) mode: 

Select   by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.  

Reset: Press the ◄ or ► button to select “Reset”, then press the ENtER  button.  

You can initialize the setting.

If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left 

and right as in the overscan function. 

You can select these options by simply pressing the

 P.SIZE 

button on the remote control.

➣

♦

➣

➣

♦

➣

➣

➣

➣

➣

➣

➣

➣



  

  















TV

SET

RESET

VCR

DVD

STB

BN68-01780J.indb   19

2008-08-29   �� 11:06:30