Samsung bn68-01780j-00 用户手册
English -
Connecting headphones (Sold separately)
You can connect a set of headphones to your set if you wish to
watch a tV programme without disturbing the other people in the
room.
When you insert the head set jack into the corresponding port, you
can operate only "Auto Volume" and "Sound Select"(in PIP mode) in
Sound menu.
Prolonged use of headphones at a high volume may damage your
Prolonged use of headphones at a high volume may damage your
hearing.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
You will not receive sound from the speakers when you connect headphones to the system.
The headphone volume and TV volume are adjusted differently.
➣
➣
➣
➣
➣
tV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
The
- VOL + and MUtE buttons do not operate when the "TV Speaker" is set to Off.
When “TV Speaker” is set to “Off”, you can operate only “Sound Select” (in PIP mode) in Sound
menu.
Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
−
Main: Used to listen to the sound of the main picture.
−
Sub: Used to listen to the sound of the sub picture.
♦
➣
➣
♦
Selecting the Sound Mode
You can set the sound mode in the "tools" menu.
When you set to "Dual I-II", the current sound mode is displayed
on the screen.
1. Press the tOOLS button on the remote control.
. Press the ▲ or ▼ button to select “Dual I-II".
. Press the ◄ or ► button to select required option.
. Press the ENtER button.
1. Press the tOOLS button on the remote control.
. Press the ▲ or ▼ button to select “Dual I-II".
. Press the ◄ or ► button to select required option.
. Press the ENtER button.
Audio Type
Dual 1/2
Default
A2
Stereo
Mono
MONO
Automatic
change
Stereo
STEREO ↔ MONO
Dual
DUAL 1 ↔ DUAL 2
DUAL 1
NICAM
Stereo
Mono
MONO
Automatic
change
Stereo
MONO ↔ STEREO
Dual
MONO ↔ DUAL 1
DUAL 2
DUAL 1
If the stereo signal is weak and an automatic switching occurs, then switch to the Mono.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in TV mode.
This function is only activated in stereo sound signal. It is deactivated in mono sound signal.
This function is only available in TV mode.
➣
➣
➣
➣
➣
tools
Anynet+ (hDMI-CEC)
Picture Mode
: Standard
Sound Mode
: Custom
Sleep timer
:
Off
SRS tS Xt
:
Off
Energy Saving
:
Off
Dual l-ll
◄ Mono ►
Move
Adjust
Exit
TV Side Panel
BN68-01780J.indb 23
2008-08-29 �� 11:06:32