3M Fibrlok 2529 产品宣传页
产品代码
2529
3M
™
Fibrlok
™
II
Universal Optical Fiber Splice 2529
Applications
• Single mode and multimode fibers
• Both construction and maintenance
• Aerial, buried, underground, pedestal
• Inside or outside buildings
• FTTx, Metro and Enterprise networks
• Up to 10 Gigabit data rates
• High density substitute for connectors
• Both construction and maintenance
• Aerial, buried, underground, pedestal
• Inside or outside buildings
• FTTx, Metro and Enterprise networks
• Up to 10 Gigabit data rates
• High density substitute for connectors
Specifications
Fiber diameter
125 µm
Coating diameter
250 or 900 µm
Mean insertion loss
<0.1 dB
Reflectance
<-35 dB from -40° to 80° C (-40° to 176° F)
<-60 dB typical at room temperature
Tensile strength
4.4N (1.0 lb.) minimum; 13.2N (>3.0 lbs.) typical
Material
Engineering thermoplastic with aluminum alloy element; UL 94, V-O
rating
Environmental specifications
Operating temperature
-40° to 80° C (-40° to 176° F)
Thermal cycling
Change in insertion loss <0.5 dB, -40° to 80° C (-40° to 176° F)
Fungus resistance
ASTM G-21-70; rating 0
Vibration
IEC 61300-2-1 (EIA standard FOTP-11; test condition 1)
Water immersion
Seven days @ 43° C; change in insertion loss ≤0.05 dB; 21,000
hours with <0.2 dB change
Extended high humidity
8,812 hours @ 85° C, 85% humidity with <0.2 dB change
Features
Benefits
< 0.1 dB typical insertion loss
High performance
30 second installation time
Increased productivity
Minimum tooling requirements
Low capital cost
No epoxy or electricity required
Easy on-site installation
Simple, easy to use
Minimal training, lower installed cost
Ability to reposition fibers
Improved splicing yield
Single splice for any combination
250 µm or 900 µm fibers
250 µm or 900 µm fibers
Reduced inventory
3M
™
Fibrlok
™
II Universal Optical Fiber Splice 2529
3M
™
Fibrlok
™
Splice Kit with Cleaver 2559-C