Nokia 6210 Navigator 用户手册
20
C a l l f u n c t i o n s
D
r a f
t
■ Connect a compatible headset
Do not connect products that create an
output signal as this may cause damage to
the device. Do not connect any voltage
source to the Nokia AV Connector.
output signal as this may cause damage to
the device. Do not connect any voltage
source to the Nokia AV Connector.
When connecting any external device or any
headset, other than those approved by Nokia
for use with this device, to the
Nokia AV Connector, pay special attention to
volume levels.
headset, other than those approved by Nokia
for use with this device, to the
Nokia AV Connector, pay special attention to
volume levels.
■ Connect a USB data cable
Connect a compatible USB data cable
to the USB connector.
to the USB connector.
To select the default USB connection
mode or change the active mode, select
mode or change the active mode, select
>
Settings
>
Connectivity
>
USB
>
USB connection mode
and the desired
mode. To set whether the default mode
is activated automatically, select
is activated automatically, select
Ask on
connection
>
No
.
3. Call functions
To adjust the volume during a call, press the volume keys.
■ Make a voice call
1. In the standby mode, enter the phone number, including the area code. Press
the clear key to remove a number.
For international calls, press * twice for the international prefix (the +
character replaces the international access code), and enter the country code,
area code (omit the leading zero if necessary), and phone number.
character replaces the international access code), and enter the country code,
area code (omit the leading zero if necessary), and phone number.
2. To call the number, press the call key.
3. To end the call, or to cancel the call attempt, press the end key.
To select whether active calls are ended when closing the slide, select
>
Settings
>
Phone sett.
>
General
>
Slide handling
>
Closing the slide
>
Change
>
End active call
or
Continue active call