Panasonic KX-P1131E 用户手册

下载
页码 49
Initial Setup Mode
The 18 features (items) can be set in the Initial Setup
mode through the Control Panel. For the features and
the indicators condition, refer to Page 34. These
features can also be set through the Control Panel
Software program (Page 25).
1.
2.
While pressing 
LOAD/PARK
, turn the
power on to enter the Initial Setup mode.
Both FONT indicators and the HIGH SPEED
indicator will be blinking. The current settings will be
printed automatically.
3.
Press 
FONT
 and 
ON LINE
 to select the
item.
Each time you press 
FONT
 and 
ON LINE
,
you will advance to the next item. Select an item and
confirm the selection with the FONT indicators (A)
and ON LINE indicator (B) (on, off, blinking)
(Page 34).
A
B
4.
Press 
PITCH
 to set the item’s status.
The item’s status will change each time you press
PITCH
settings, repeat step 3 and 4.
5.
Press 
LOAD/PARK
 to exit the Initial Setup
mode.
The FONT indicators will go off and the current
conditions will print.
Note
To return all current settings to the factory
settings, follow the steps below.
1.
While pressing 
LOAD/PARK
, turn
the power on, then release.
2.
Press 
TEAR OFF
.
3.
Press 
LOAD/PARK
 to exit the
Initial Setup mode.
Operating Instructions
33
Using the Control Panel