Philips fwm377 用户手册
English
15
Basic Functions
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
shows the various features offered by the system.
To activate the demonstration
●
In standby mode, press and hold STOP
Ç on
the system for 5 seconds to switch to
demonstration.
demonstration.
To deactivate the demonstration
●
Press and hold STOP
Ç on the system for 5
seconds to switch to standby mode.
Switching the system on
●
Press ECO POWER/STANDBY-ON
2.
➜
The system will switch to the last selected
source.
●
Press DISC (or DISC 1/2/3, CD 1/2/3),
TUNER, AUX•TAPE (or AUX, TAPE) or
USB.
TUNER, AUX•TAPE (or AUX, TAPE) or
USB.
➜
The system will switch to the selected source.
●
Press OPEN•CLOSE or DISC CHANGE.
➜
The system will switch to the disc source and
the disc tray will open.
In Eco Power standby mode
●
Press ECO POWER/STANDBY ON/B to
switch on the last selected source.
switch on the last selected source.
●
Press DISC (or DISC 1/2/3, CD 1/2/3),
TUNER, AUX•TAPE (or AUX, TAPE) or
USB.
TUNER, AUX•TAPE (or AUX, TAPE) or
USB.
Switching the system to standby
mode
mode
In demonstration mode
●
Press and hold
Ç on the system.
In any other source mode
●
Press ECO POWER/STANDBY ON B.
➜
The clock will appear on the display when the
system is in standby mode.
Switching the system to Eco
Power mode (< 1 Watt)
Power mode (< 1 Watt)
●
Press and hold ECO POWER/STANDBY
ON/B until “
ON/B until “
ECO POWER” is displayed.
➜
The display screen will go blank.
➜
The low power ECO POWER LED will be
lighted.
Note:
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power standby or standby mode.
– If you have not deactivated the demonstration, it
will resume five seconds after the system switches
to Eco Power standby or standby mode.
Power-saving automatic standby
As a power-saving feature, the system will
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
automatically switch to Standby mode if you do
not press any buttons within 15 minutes after a
disc has stopped playing.
Dim mode
You can select the desired brightness for the
display.
display.
●
In any source mode (except standby mode),
press DIM repeatedly to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
press DIM repeatedly to select DIM 1, DIM 2,
DIM 3 or DIM OFF display mode.
➜
DIM
is shown, except for DIM OFF mode.
Volume control
Adjust MASTER VOLUME to increase (turn
knob clockwise or press VOL + on the remote)
or decrease (turn knob anti-clockwise or press
VOL - on the remote) the sound level.
knob clockwise or press VOL + on the remote)
or decrease (turn knob anti-clockwise or press
VOL - on the remote) the sound level.
To listen through the headphones
●
Connect the headphones plug to
the n socket at the front of the
system.
the n socket at the front of the
system.
➜
The speakers will be muted.
To switch off the volume
temporarily
temporarily
●
Press MUTE on the remote control.
➜
Playback will continue without sound and
"
MUTE" is displayed.
●
To restore the volume, press MUTE again or
increase the volume level.
increase the volume level.
pg001-034_FWM377_12_Eng
2007.2.4, 16:38
15