Philips fwm377 用户手册
English
23
Tape Operation/Recording
IMPORTANT!
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV or
speaker).
– Before playing a tape, check and tighten
slack tape with a pencil. Slack tape may get
jammed or may burst in the mechanism.
– C-120 tape is extremely thin and is easily
deformed or damaged. It is not
recommended for use in this system.
– Store the tapes at room temperature and
do not put them too close to a magnetic
field (for example, a transformer, TV or
speaker).
Tape playback
1
Select TAPE source.
2
Open the tape key flap marked “OPEN
2” on
the front panel.
3
Press STOP•OPEN
Ç0 to open the tape
door.
4
Insert a recorded tape and close the tape door.
●
Load the tape with the open side downward and
the full spool to the left.
the full spool to the left.
5
Press PLAY
2 to start playback.
●
The key is automatically released at the end of a
tape, except if PAUSE
tape, except if PAUSE
; has been activated.
6
To pause, press PAUSE
;. Press again to resume.
7
By pressing
à or á on the system fast winding
of tape is possible in both directions.
8
To stop the tape, press STOP•OPEN
Ç0.
Note:
– The sound source cannot be changed while
playing or recording a tape.
– The sound source cannot be changed while
playing or recording a tape.
pg001-034_FWM377_12_Eng
2007.2.4, 16:38
23