Mercedes Benz 2005 e 320 用户手册

下载
页码 506
184
Controls in detail
Automatic transmission
Downshifting
Briefly press the gear selector lever to 
the left in the D- direction 
(
page 176).
or
Press button 1 on the left side of the 
steering wheel (
page 181).
The transmission shifts to the next 
lower gear.
Upshifting
Briefly press the gear selector lever to 
the right in the D+ direction 
(
page 176).
or
Press button 2 on the right side of the 
steering wheel (
page 181).
The transmission shifts to the next 
higher gear.
If, instead of the manual program mode 
symbol
M
, the
p symbol appears in 
the multifunction display (
page 174), 
shift to the next higher gear. The fuel 
supply will otherwise be interrupted to 
prevent the engine from overrevving.
Warning!
G
On slippery road surfaces, never downshift 
in order to obtain braking action. This could 
result in drive wheel slip and reduced 
vehicle control. Your vehicle’s ABS will not 
prevent this type of loss of control.
i
When you brake or stop, the transmis-
sion shifts down to a gear from which 
you can easily accelerate or take off.
!
In the manual program mode M, the 
transmission will not upshift, even if 
the engine has reached its overrevving 
range. Shift up to the next gear before 
the engine has reached its overrevving 
range. Make absolutely certain that the 
engine speed does not reach the red 
marking on the tachometer 
(
page 24). Otherwise the engine 
could be damaged which is not covered 
by the Mercedes-Benz Limited 
Warranty.