Mercedes Benz 2005 e 320 用户手册
219
Controls in detail
Power windows
왘
Switch on the ignition (
컄
page 33).
Opening the windows
왘
Press switch 2 to 5 to the resistance
point.
point.
The corresponding window will move
downwards until you release the
switch.
downwards until you release the
switch.
Closing the windows
왘
Pull switch 2 to 5 to the resistance
point.
point.
The corresponding window will move
upwards until you release the switch.
upwards until you release the switch.
Fully opening the windows
(Express-open)
(Express-open)
왘
Press switch 2 to 5 past the resis-
tance point and release.
tance point and release.
The corresponding window opens com-
pletely.
pletely.
Fully closing the windows
(Express-close)
(Express-close)
왘
Pull switch 2 to 5 past the resis-
tance point and release.
tance point and release.
The corresponding window closes com-
pletely.
pletely.
i
Operating the windows from the rear is
not possible if you activate the override
switch (
not possible if you activate the override
switch (
컄
page 83).
i
With the SmartKey in starter switch po-
sition 0 or removed from the starter
switch, the power windows can be op-
erated:
sition 0 or removed from the starter
switch, the power windows can be op-
erated:
앫
until you open the driver’s or front
passenger’s door
passenger’s door
앫
for at least five minutes.
Warning
G
If you pull and hold the switch up when clos-
ing the window, and upward movement of
the window is blocked by some obstruction
including but not limited to arms, hands, fin-
gers, etc., the automatic reversal will not op-
erate.
ing the window, and upward movement of
the window is blocked by some obstruction
including but not limited to arms, hands, fin-
gers, etc., the automatic reversal will not op-
erate.
Warning!
G
Driver’s door only:
If within five seconds switch is again pulled
past the resistance point and released, the
automatic reversal will not operate.
If within five seconds switch is again pulled
past the resistance point and released, the
automatic reversal will not operate.