Mercedes Benz 2005 e 320 用户手册

下载
页码 506
288
Operation
Driving instructions
Power assistance
Brakes
Warning!
G
The brake system requires electrical energy 
for operation.
A malfunction in the vehicle’s power supply 
or electrical system may impair brake sys-
tem operation and switch it into its emer-
gency operation mode. In such a case, the 
red brake warning lamp (
page 358) and 
warning messages in the instrument cluster 
(
page 367) come on while driving. To 
brake, the driver must then apply signifi-
cantly greater brake pedal pressure and de-
press the pedal much further to obtain the 
expected braking effect. If necessary, apply 
full pressure to the brake pedal. Brakes may 
only be applied to the front wheels. Stop-
ping distance is increased! 
If there is a malfunction in the SBC brake 
system, we recommend that the vehicle be 
transported with all wheels off the ground 
using flatbed or appropriate wheel lift/dolly 
equipment. A tow bar must be used if cir-
cumstances do not permit the use of the 
recommended towing methods and the ve-
hicle requires towing with all four wheels on 
the ground. Towing the vehicle with all four 
wheels on the ground is only permissible for 
distances up to 30 miles (50 km) and at a 
speed not to exceed 30 mph (50 km/h). For 
more information, refer to “Towing the vehi-
cle” (
page 439). For more information, 
see “SBC brake system” (
page 90).
With the engine not running, there is no 
power assistance for the brake and steering 
systems. In this case, it is important to keep 
in mind that a considerably higher degree of 
effort is necessary to brake and steer the ve-
hicle.
Warning!
G
After driving in heavy rain for some time 
without applying the brakes or through wa-
ter deep enough to wet brake components, 
the first braking action may be somewhat 
reduced and increased pedal pressure may 
be necessary to obtain expected braking ef-
fect. Maintain a safe distance from vehicles 
in front.
Resting your foot on the brake pedal will 
cause excessive and premature wear of the 
brake pads.
It can also result in the brakes overheating, 
thereby significantly reducing their effec-
tiveness. It may not be possible to stop the 
vehicle in sufficient time to avoid an acci-
dent.