Mercedes Benz 2005 e 320 用户手册
421
Practical hints
Replacing bulbs
Low beam bulb (halogen headlamps
only)
only)
왘
Turn housing cover 3 counterclock-
wise and remove it.
wise and remove it.
왘
Pull electrical connector 7 off.
왘
Unclip the retainer spring on the bulb
socket and take out the bulb.
socket and take out the bulb.
왘
Insert the new bulb so that its base lo-
cates in the recess on the lower left
and is level to it.
cates in the recess on the lower left
and is level to it.
왘
Clip on the retainer spring.
왘
Plug electrical connector 7 onto the
bulb.
bulb.
왘
Align housing cover 3 and turn it
clockwise.
clockwise.
High beam bulb/high beam flasher
bulb (halogen headlamps)/high beam
flasher bulb (Bi-Xenon* headlamps)
bulb (halogen headlamps)/high beam
flasher bulb (Bi-Xenon* headlamps)
왘
Turn bulb socket 1 with the bulb
counterclockwise and remove it.
counterclockwise and remove it.
왘
Pull electrical connector 5 off.
왘
Press gently onto the bulb and turn
counterclockwise out of bulb
socket 1.
counterclockwise out of bulb
socket 1.
왘
Press the new bulb gently into bulb
socket 1 and turn clockwise until it
engages.
socket 1 and turn clockwise until it
engages.
왘
Plug electrical connector 5 onto the
bulb.
bulb.
왘
Place bulb socket 1 back into the
lamp and turn it clockwise.
lamp and turn it clockwise.
Front turn signal lamp bulb
왘
Turn bulb socket 4 with the bulb
counterclockwise and remove it.
counterclockwise and remove it.
왘
Press gently onto the bulb and turn
counterclockwise out of bulb
socket 4.
counterclockwise out of bulb
socket 4.
왘
Press the new bulb gently into bulb
socket 4 and turn clockwise until it
engages.
socket 4 and turn clockwise until it
engages.
왘
Place bulb socket 4 back into the
lamp and turn it clockwise.
lamp and turn it clockwise.
Parking and standing lamp bulb
왘
Pull out bulb socket 6 with the bulb.
왘
Press gently onto the bulb and turn
counterclockwise out of bulb
socket 6.
counterclockwise out of bulb
socket 6.
왘
Press the new bulb gently into bulb
socket 6 and turn clockwise until it
engages.
socket 6 and turn clockwise until it
engages.
왘
Press bulb socket 6 back into the
lamp.
lamp.