Mercedes Benz 2005 e 320 用户手册
48
Getting started
Driving
The engine begins to preglow and will
start automatically.
start automatically.
If the engine is at operating temperature,
the preglow indicator lamp
the preglow indicator lamp
q may not
stay on and you can start the engine with-
out preglowing:
out preglowing:
왘
Press KEYLESS-GO start/stop
button 1 until the engine is running.
button 1 until the engine is running.
Starting difficulties
If the engine does not start as described,
carry out the following steps:
carry out the following steps:
왘
If you are starting the engine with the
SmartKey, turn SmartKey in starter
switch to position 0 and repeat starting
procedure.
SmartKey, turn SmartKey in starter
switch to position 0 and repeat starting
procedure.
왘
If you are starting the engine with
KEYLESS-GO: Close any doors that
may be open to allow for better detec-
tion of the SmartKey with
KEYLESS-GO.
Or:
Start the engine with the SmartKey as
radio signals from another source may
be interfering with the SmartKey with
KEYLESS-GO.
KEYLESS-GO: Close any doors that
may be open to allow for better detec-
tion of the SmartKey with
KEYLESS-GO.
Or:
Start the engine with the SmartKey as
radio signals from another source may
be interfering with the SmartKey with
KEYLESS-GO.
왘
Repeat the starting procedure
(
(
컄
page 46). Remember that extended
starting attempts can drain the battery.
왘
Get a jump start (
컄
page 436).
If the engine does not start after several
starting attempts, there could be a mal-
function in the engine electronics or in the
fuel supply system.
starting attempts, there could be a mal-
function in the engine electronics or in the
fuel supply system.
왘
Notify an authorized Mercedes-Benz
Center.
Center.
Parking brake
1 Parking brake pedal
2 Parking brake release handle
2 Parking brake release handle
컄컄