Mercedes Benz 2005 e 320 用户手册

下载
页码 506
91
Safety and Security
Driving safety systems
The SBC brake system is automatically ac-
tivated when you
unlock the vehicle with the SmartKey 
or the KEYLESS-GO* 
open the driver’s or passenger door
turn the SmartKey in the starter switch 
to position 1
in vehicles with KEYLESS-GO*, press 
the start/stop button on the gear se-
lector lever once
depress the brake pedal
release the parking brake
Warning!
G
The SBC brake system requires electrical 
power to operate.
A malfunction in the vehicle’s power supply 
or electrical system may impair brake sys-
tem operation and switch it into its emer-
gency operation mode. In such a case, the 
red brake warning lamp (
page 358) and 
warning messages in the instrument cluster 
(
page 367) come on while driving. To 
brake, the driver must then apply signifi-
cantly greater brake pedal pressure and de-
press the pedal much further to obtain the 
expected braking effect. If necessary, apply 
full pressure to the brake pedal. Brakes may 
only be applied to the front wheels. Stop-
ping distance is increased!
If there is a malfunction in the SBC brake 
system, we recommend that the vehicle be 
transported with all wheels off the ground 
using flatbed or appropriate wheel lift/dolly 
equipment.
 A tow bar must be used if circumstances do 
not permit the use of the recommended 
towing methods and the vehicle requires 
towing with all four wheels on the ground. 
Towing the vehicle with all four wheels on 
the ground is only permissible for distances 
up to 30 miles (50 km) and at a speed not to 
exceed 30 mph (50 km/h). For more infor-
mation, refer to “Towing the vehicle” 
(
page 439).
i
If the SBC brake system is activated as 
the brake pedal is first depressed, you 
may feel a reduced pedal resistance 
and longer pedal travel than normal. 
When releasing the pedal, you may also 
feel the brake pedal pulsate and you 
may hear a sound which is caused by 
the activation of the SBC brake system 
pump. This is normal and not an indica-
tion of a malfunction. Pedal travel re-
turns to normal when you release the 
brake pedal and the sound soon ceas-
es.
If you experience the above while driv-
ing and the red brake warning lamp 
(
page 358) illuminates and/or warn-
ing messages appear in the instrument 
cluster (
page 367), the brake system 
is malfunctioning. Follow the instruc-
tions of the warning message(s) and 
have the brake system checked imme-
diately.