Mitsubishi ah129 用户手册

26

A-KEY is programmed by entering the six to 26 digit number
provided by your carrier.  The display will show the digits of
the entered number.  The “CLR” key can be used for editing.
Momentary depression clears the last entered digit, and all
digits are cleared by continuous depression.

When the complete digit sequence has been entered, the
“STO”+ “STO” key should be pressed to store the number.
At this point the phone will validate the A-KEY based on the
check sum.  If the key is valid, the display shows “-OK-” for
approximately two (2) seconds and restarts the phone from
the Power-ON sequence.  If the key is invalid, the display
shows “Invalid” for approximately two (2) seconds and
returns to the A-KEY re-entry state.

Note:

During the A-KEY programming mode the “END” key
can be used to cancel and exit from this mode at any
time.

If the new A-KEY is entered, the existing A-KEY is overwrit-
ten by the new A-KEY.

Once the A-KEY is programmed, it may not be viewed
through the display or any device attached to the phone.

User action:   FCN + FCN

(Standby only)

          Menu

Action

     

▼

 

↑

 To RCL RCL

▲

▼

  

▼

 

↑

 / 

▲

 

↓

FCN

  

▼

 

↑

 / 

▲

 

↓