Hitachi c43wp910tn 用户手册

sleep timer and default viewing controls

Various broadcast stations now transmit WSS (Wide Screen Signals) which identifies the picture format

movies and programs are broadcast in. Your TV can detect these Wide Screen Signals and automatically switches

your TV to the correct format (when in AUTO mode). However, some broadcasters do not transmit this WSS, and

so your TV will not recognise which format is being transmitted. Therefore, DEFAULT ZOOM is used to choose your

picture requirements when a Wide Screen Signal has not been sent or has not been detected.

If your TV is receiving a 4:3 Wide Screen Signal, the viewing format displayed can be set using the default 4:3 .

Auto Wide Screen Detect, when switched ON (and there is no WSS signal) enables your TV  to look for the

black bands at the top and bottom of the broadcast received and expands the picture in the appropriate aspect

ratio. If this is set to ‘OFF’, these black bands cannot be detected. Therefore the picture format will revert to the

setting specified in the DEFAULT ZOOM option if there is no WSS signal.

When watching some programs with Auto WS Detect ON, the C16:9L mode may result in unnecessary cropping at

the top and bottom of the picture resulting in lost subtitles etc. To overcome this, please use the 16:9 or subtitle

button on your handset.

When using external equipment with on-screen displays, incorrect operation of the Auto WS switching may occur

while performing certain operations. For example, while watching a 16:9 cinema scope format film on a DVD player,

pressing the pause button may result in the TV switching from the C16:9L mode to the default zoom. Visual forward

and rewind operations may also have similar results. This action will also show your DVD players software menus on

your television screen. This is normal operation.

Please Note: If you can see the screen format changing frequently after setting to ‘ON’ mode, set Auto WS Detect

option to ‘OFF’ to stay at one fixed aspect ratio.

Use up/down cursor buttons to select 

option to adjust.

Once highlighted, accept selection - when you turn your TV off,  the TV will 

memorise your adjustments

Press  the MENU button to obtain 

MAIN MENU.

Press the cursor down button to select

FEATURES.

Once highlighted, accept selection.

1

2

3

4

6

Use right/left buttons to adjust chosen

feature.

5

Your TV also has default features which can control the viewing format of your TV’s picture.

See above for entry into and adjustment of these features.These features and their settings will only be effective if

the widescreen picture format is set to AUTO.

This feature is used to automatically place your TV into standby mode after a set number of

minutes - use the right/left cursor buttons to set the timer between 5 and 120 minutes.When the timer

has only a minute left this will be shown on the screen as a countdown from 59 seconds to zero, after

which your TV’s status will be standby.

Use this control to adjust the contrast of your teletext pages. It only effects the pages seen in teletext mode.