GE 82-POE 用户手册

Chapter 4: Web-Based Management 

96 

GE-DS-82 and 82-PoE Ethernet Managed Switch User Manual 

This page includes the following fields: 
 

A value, which is used to identify the active LACP. The Managed Switch 
with the lowest value has the highest priority and is selected as the 
active LACP peer of the trunk group. 

There are 13 trunk groups to be selected. Assign the "Group ID" to the 
trunk group. 

•  Enabled, the trunk group is using LACP. A port which joins an LACP 

trunk group has to make an agreement with its member ports first.  

•  Disabled, the trunk group is a static trunk group. The advantage of 

having the LACP disabled is that a port joins the trunk group without 
any handshaking with its member ports; but member ports won't 
know that they should be aggregated together to form a logic trunk 
group. 

This column field allows the user to type in the total number of active 
port up to four. With LACP static trunk group, e.g. you assign four ports 
to be the members of a trunk group whose work ports column field is 
set as two; the exceed ports are standby/redundant ports and can be 
aggregated if working ports fail. If it is a static trunk group (non-LACP), 
the number of work ports must equal the total number of group 
member ports. 

A trunk group, including member ports split between two switches, has to 

enable the LACP function of the two switches. 

When you had setup the LACP aggregator, you will see relation information in here. 
•  LACP disabled 
Having set up the aggregator setting with LACP disabled, you will see the local static 
trunk group information on the tab of Aggregator Information.