Russell Hobbs rh1042 用户手册
Child Lock
Child lock is used in order to protect the washing cycle from the effects of unwanted
button activations during the cycle. The Child lock is activated by pressing the first
and third button on the control panel at the same for more than 3 seconds. When
child lock is activated LEDs on the function buttons will blink to indicate that Child
Lock is active. In order to deactive Child Lock, the same buttons (1st and 3rd) should
be pressed again for more than 3 seconds. Deactivation of Child Lock is shown by
blinking of the LED on the Start/Pause button.
button activations during the cycle. The Child lock is activated by pressing the first
and third button on the control panel at the same for more than 3 seconds. When
child lock is activated LEDs on the function buttons will blink to indicate that Child
Lock is active. In order to deactive Child Lock, the same buttons (1st and 3rd) should
be pressed again for more than 3 seconds. Deactivation of Child Lock is shown by
blinking of the LED on the Start/Pause button.
Running the machine
Program selection and features
Select an appropriate programme for your clothing by turning the main knob.
Start/Pause
By pressing this button, you can start the programme you have selected or pause a
running programme.
running programme.
Starting the programme
Adjust the programme knob
to
the programme you desire.
The programme ready light will be on.
If you want, you can select one or more additional functions.
Run the programme which you have selected by pressing the Start/Pause
button.
Changing the programme
If you have selected a programme and you want to continue with another:
Press the Start/Pause button.
Bring the program knob to
the
O (off) position.
Adjust the programme knob to the programme you desire, (you can select the
program that you desire from Table 1).
The programme ready light will be on.
By pressing the Start/Pause button, run the programme which you have
selected.
Cancellation of the Programme
To end a programme early:
Press the Start/Pause button.
Turn the programme knob to O (off) position.
Turn the programme
knob to “Draining” or “Spinning” programmes.
The programme ready light will be on.
Run the programme you have selected by pressing the start/pause button.
End of programme
Your machine will automatically stop when the programme you have selected
ends.
The programme end light will be on.
Turn the programme knob to
the
O (off) position.
For Customer Services, Spare Parts & Manufacturer's Warranty Information please call 0845 208 8750
-17-