Hitachi c32wf560n 用户手册
- 15 -
EXT-2 Output
From EXT-2 Output, either TV, EXT-1 or F-AV can be
given. TV, EXT-1 or F-AV can be selected by pressing
or
button on EXT-2 OUTPUT.
Blue Background During No-Signal
In case, no valid signal is detected (in TV or AV mode)
Blue Background is activated. During search process
Blue Background is not active. But instead of it there is
another feature given; the semi-transparent menu back-
ground is made blue.
The BLUE BACKGROUND feature can be set by
The BLUE BACKGROUND feature can be set by
or
button to either On or Off.
To Store Settings
In FEATURE menu all settings are stored automatically.
Installation Menu
To enter the Install menu directly, press the Blue
button, or
Press MENU button, now you are in MENU. In the
MENU, select INSTALL using or button.
Then enter the Install menu pressing
Then enter the Install menu pressing
or
button.
6281'
3,&785(
)($785(
,167$//
352*5$0
3,&785(
)($785(
,167$//
352*5$0
Selecting Programme
To select programme number, you can use
or
button, Digit Buttons or The Double Digit button
with digit buttons.
Tuning Mode
Selecting Channel
Press or button to select TUNING MODE.
By pressing
or
button , you can select the
mode in which you want the search to be made,
CHANNEL mode or FREQUENCY mode.
When you select CHANNEL the display of the Tuning
Menu will be as below :
Selecting Band
BAND, can be selected either,
C or S by or button.
For band C,
01 - 83, WEST EUROPE.
01 - 12, 21 - 69, EAST EUROPE .
01 - 17, 21 - 73, UK.
01 - 76, FRANCE.
04 - 09, FRANCE 2.
For band S,
01 - 41, for all channel tables.
C or S by or button.
For band C,
01 - 83, WEST EUROPE.
01 - 12, 21 - 69, EAST EUROPE .
01 - 17, 21 - 73, UK.
01 - 76, FRANCE.
04 - 09, FRANCE 2.
For band S,
01 - 41, for all channel tables.
Selecting Channel
CHANNEL can be changed by
or
button, by
Digit Buttons or by the Double Digit button with digit
buttons.
Selecting Colour System
This item is used to change the colour system. If the
picture is not clear or no colour appears, select the
correct colour system to display the picture normally.
When the TV is in TV mode; by pressing
When the TV is in TV mode; by pressing
or
button you may select one of these options: PAL,
SECAM. When the TV is in AV mode; you may select
one of these options: AUTO, PAL, SECAM, NTSC 3.58,
NTSC 4.43.
28-3217W-1244UK-ENG-ST7P-AK45-BSI-PLL-FS-RF-TILT-CLED-50047944.p65
13.07.2004, 11:25
15