Honeywell TH6320U 用户手册

ENGLISH

MCR29435

M29433

1.  Separate wallplate from thermostat.
2.  Mount wallplate as shown below.

Drill 3/16" holes for drywall. Drill 7/32" holes for plaster.

Wall anchors

Wallplate

Wire hole

Mounting screws

CAUTION: ELECTRICAL HAZARD
Can cause electrical shock or equipment damage. Disconnect power before  

beginning installation.

MERCURY NOTICE
If this product is replacing a control that contains mercury in a sealed tube, do not  

place the old control in the trash. Contact your local waste management authority for 

instructions regarding recycling and proper disposal.

Pull here to remove wallplate 

from new thermostat.

Remove battery holder.

Insert reference card after wallplate is 

mounted (see instructions, below).

It's easier to grasp the wallplate 

and remove it after completely 

removing the battery holder.

MCR29434