Kenwood KDC-X995 用户手册
English
|
53
3
Select the category (type) you wish to set
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “General”, “Home”, “Office”, “Mobile”, or
“Other”
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “General”, “Home”, “Office”, “Mobile”, or
“Other”
4
Select a mode
Turn the [VOL] knob.
Turn the [VOL] knob.
Display
Operation
“PN Type Regist”
Register a voice tag.
* Displayed only when a name for which a voice tag has
been registered is selected.
5
Register the category (type) by performing
steps 5 to 8 in
steps 5 to 8 in
6
Exit BT Settings mode
Press the [
Press the [
] button.
⁄
• Set the voice tag for all the 5 categories. If the voice tag
is not registered for all the categories, the Phone book
may not be recalled by voice command.
may not be recalled by voice command.
Select “PB Name Regist” (Regist)
5
Press the [VOL] knob.
6
Register a voice tag (first)
“Enter Voice 1” is displayed.
When a beep is heard, say a voice tag within 2
seconds.
“Enter Voice 1” is displayed.
When a beep is heard, say a voice tag within 2
seconds.
7
Confirm the voice tag (second)
“Enter Voice 2” is displayed.
When a beep is heard, say the same voice tag as
that you said in step 6 within 2 seconds.
“Completed” is displayed.
“Enter Voice 2” is displayed.
When a beep is heard, say the same voice tag as
that you said in step 6 within 2 seconds.
“Completed” is displayed.
8
End registration
Press the [VOL] knob.
Return to step 3. You can register another voice tag
continuously.
Press the [VOL] knob.
Return to step 3. You can register another voice tag
continuously.
⁄
• If your voice cannot be recognized, a message is
displayed. Pressing the [VOL] knob allows you to retry
voice input. Refer to
voice input. Refer to
Select “PB Name Check” (Play)
5
Press the [VOL] knob.
Play the registered voice and return to step 3.
Play the registered voice and return to step 3.
Select “PB Name Delete” (Delete)
5
Delete a voice tag
Press the [VOL] knob.
Press the [VOL] knob.
6
Turn the [VOL] knob to select “YES”, and then
press the [VOL] knob.
press the [VOL] knob.
Exit BT Settings mode
Press the [
] button.
⁄
• Audio sound is not output during voice tag registration.
Setting a Voice Command for
Category
Category
Add a voice tag to the phone number category
(type) for voice calling.
(type) for voice calling.
1
Enter Bluetooth mode
Press the [
Press the [
] button.
✍
You can also select from “Settings” in Menu List
mode.
mode.
2
Enter Phone Number type edit mode
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”
Turn the [VOL] knob and press it when the
desired item is displayed.
Select “BT Settings”
>
“Voice Tag”
>
“PN Type
Edit”.