Hanna Instruments hi 933300 用户手册
31
Each printout provides the following informa-
tion:
tion:
a - Running log number.
b - Running sample number in that particular
log.
c - Date (DD-MM-YY)
d - Printing interval indicator in minutes
e - Time (HH-MM)
f - Conductivity value in µS/cm or mS/cm
g - Temperature in degrees Centigrade.
When the meter is in the re-
cording mode "LOG" is dis-
played on the bottom left cor-
ner of the LCD.
cording mode "LOG" is dis-
played on the bottom left cor-
ner of the LCD.
If no keys are pressed, the meter goes to
standby mode to prolong the battery life. To
reactivate the display press any key.
standby mode to prolong the battery life. To
reactivate the display press any key.
Notes:
•
It is recommended to use the voltage
adapter (HI 710005 or HI 710006) dur-
ing recording, especially when many
printouts are going to be taken.
adapter (HI 710005 or HI 710006) dur-
ing recording, especially when many
printouts are going to be taken.
•
Before starting to record, make sure
that there is enough paper for your
measurements.
When the paper is finished the meter
will not advise the operator and the
printouts could be lost.
that there is enough paper for your
measurements.
When the paper is finished the meter
will not advise the operator and the
printouts could be lost.
2 9 - 0 3 - 9 6
- - 0 1 - -
0 0 0 1 M
0 0 1 5
* 1 6 . 5 9
5 1 3 7 µ S
2 5 . 9 ° C
<>
a
b
c
d
e
f
g
LOG INTV
TIME