Runco cinemawall cw-50xa 用户手册
Runco CinemaWall Owner’s Operating Manual
35
PRE
L
IMINAR
Y
V Shift: Use the up- or down-arrow buttons (
,
) to highlight V Position. Then, use the
right-arrow button (
) to shift the image up; use the left-arrow button (
) to shift the
image down.
H Shift: Use the up- or down-arrow buttons (
,
) to highlight H Position. Then, use
the right-arrow button (
) to shift the image to the right; use the left-arrow button (
) to
shift the image to the left.
V Size: Use the up- or down-arrow buttons (
,
) to highlight V Size. Then, use the
right-arrow button (
) to increase the height; use the left-arrow button (
) to decrease
it.
Table 4-1. Aspect Ratio Settings
Aspect Ratio
Description
Anamorphic
Select Anamorphic to view 16:9 DVDs
and HDTV programs in their native
aspect ratio. 4:3 images are stretched
horizontally to fit a 16:9 screen.
and HDTV programs in their native
aspect ratio. 4:3 images are stretched
horizontally to fit a 16:9 screen.
Standard
Standard 4:3 scales the input signal to fit
in the center of the 16:9 screen. 4:3 is
the aspect ratio used by computer
monitors, standard television
programming and most VHS video
cassettes.
in the center of the 16:9 screen. 4:3 is
the aspect ratio used by computer
monitors, standard television
programming and most VHS video
cassettes.
Letterbox
In Letterbox mode, the image is
stretched vertically; the top and bottom
portions are “blanked off.” Letterbox is
best suited for viewing LaserDisc movies
or non-anamorphic DVDs on a 4:3
screen.
stretched vertically; the top and bottom
portions are “blanked off.” Letterbox is
best suited for viewing LaserDisc movies
or non-anamorphic DVDs on a 4:3
screen.
VirtualWide
A 4:3 image is scaled NON-linearly (more
on the sides than in the center) to fit a
16x9 screen.
on the sides than in the center) to fit a
16x9 screen.
4:3 Image on
16:9 Screen
16:9 Image on
16:9 Screen
Active Image
Area (4:3)
Letterbox Image on
16:9 Screen