Honeywell T7350 用户手册
T7350 COMMERCIAL PROGRAMMABLE THERMOSTAT
15
63-2605—5
PROGRAMMING
The thermostat operates at the Occupied temperature setting
until the thermostat is programmed. Table 12 shows the
default temperature settings. (The program has four):
— Occupied heat.
— Occupied cool.
— Not Occupied heat.
— Not Occupied cool.
Table 12. Occupied and Not Occupied
Default Temperature Settings.
The thermostat can be set for two Occupied and two Not
Occupied times for each day of the week (28 independent
time settings). Programming Holidays provides a total of 32
independent time settings.
The Temporary Occupied key provides quick temporary
temperature changes for increased occupant comfort. The
Temporary Not Occupied key provides energy efficient
operation for extended periods of time.
IMPORTANT
• Programming the thermostat with the keypad
requires 24 Vac (turn on system power).
• Keyboard lockout must be disabled.
NOTE: Before starting the program procedure, use
Table 13 to organize the program schedule.
Table 13. Occupied and Not Occupied Period Start Times.
a
Only applies to holidays programmed with 365-day calen-
dar
NOTE: 12:00 PM is Noon, and 12:00 AM is Midnight.
Setting Current Day/Time
This can be done using the keypad or a PDA interface.
IMPORTANT
• Once you set the day/time once, you should not
need to set it again. As a result, once a PDA sets the
day using calendar mode (MM/DD/YYYY), keypad
changes to the day are not allowed.
NOTES: To allow keypad day changes, use a PDA as follows:
1.
Go to the “Set Clock” function.
2.
Change the “Date Mode” from “MM/DD/YYYY” to
“Day of Week”.
3.
Press Set.
When using the keypad to change the day/time:
1. Press Set Day until the current day is displayed.
NOTE: Sun = Sunday, Mon = Monday, Tue = Tuesday,
Wed = Wednesday, Thu = Thursday,
Fri = Friday, Sat = Saturday.
2. Press Set Time.
3. Press up S or down T until the current time is
displayed.
NOTE: Tapping Set Time changes the time in one
hour increments.
4. Press Run Schedule.
Setting Schedule Times
Use the PDA or the keys in the “Schedule” area of the keypad
for this procedure.
1. Press Occupied.
NOTE: Anytime a start time is not required, press
Clear Start Time.
2. Press Day until the desired day is displayed.
3. Press Occupied or Not Occupied until the proper period
is displayed.
4. Press up S or down
T
until the desired start time is
displayed.
5. Repeat steps 3 and 4 for a given day.
6. Repeat steps 2 through 5 until finished.
Program Holidays
IMPORTANT
— Holidays must be first programmed with a PDA.
— Day-of-Week mode forces the T7350 to ignore
holidays.
With holidays set, holiday schedule times can be changed
using the keypad:
1. Use the Schedule Day key to select “Hol” for Holiday
schedule times.
2. Press Occupied or Not Occupied to switch to the proper
time period within the holiday.
Control
Occupied
Not Occupied
Heating
70° F (21° C)
55° F (13° C)
Cooling
75° F (24° C)
85° F (29° C)
Day
Occupied
Period 1
Not
Occupied
Period 1
Occupied
Period 2
Not
Occupied
Period 2
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday
Holiday
a