Radio Shack 22-1692 用户手册
16
To select the city mode, press
CITY
. The voice alert says,
“city mode,” and
C
appears on the single digit display.
Note: If you set the display brightness to dark mode, the
single digit display shows only
single digit display shows only
-
. To show
C
or
H
, set the
display brightness to bright or dim mode. (See “Selecting
Display Brightness.”)
Display Brightness.”)
To return to the highway mode, press
CITY
again. The
voice alert says, “highway mode,” and
H
appears on the
single digit display again.
Selecting Display Brightness
You can select from three levels of brightness for your ra-
dar detector: bright, dim, and dark.
dar detector: bright, dim, and dark.
Each time you turn on the detector, the display is pre-set
to full brightness. Pressing
to full brightness. Pressing
DIM
once reduces the dis-
play's brightness by half, and the voice alert says, “dim.”
When you press
When you press
DIM
a second time,
-
appears on the
single digit display and the voice alert says, “dark.” While
the display is set to dark, X, K/Ka, VG-2, and SA indica-
tors do not light during an alert. Pressing
the display is set to dark, X, K/Ka, VG-2, and SA indica-
tors do not light during an alert. Pressing
DIM
a third time
returns the display to full brightness and the voice alarm
says, “bright.”
says, “bright.”
22-1692.FM Page 16 Wednesday, September 11, 2002 8:35 AM