Bosch ndn-921 用户手册
110 en | Advanced Mode
FlexiDomeHD 720p IP Camera
AR18-10-B013 | v1.52 | 2011.06
Installation and Operation Manual
Bosch Security Systems
The new firmware is unpacked and the Flash memory is
reprogrammed. The time remaining is shown by the message
going to reset Reconnecting in ... seconds. When the upload is
completed successfully, the device reboots automatically.
If the operating status LED is red, the upload has failed and
must be repeated. To perform the upload, switch to a special
page:
1.
In the address bar of your browser, enter /main.htm after
the device IP address, for example:
192.168.0.10/main.htm
2.
Repeat the upload.
Configuration
Save configuration data for the camera to a computer and load
saved configuration data from a computer to the device.
To save the camera settings:
1.
Click Download; a dialog box appears.
2.
Follow the instructions to save the current settings.
To load configuration data from the computer to the device:
1.
Enter the full path of the file to upload or click Browse to
select the desired file.
2.
Make certain that the file to be loaded comes from the
same device type as the device to be reconfigured.
3.
Click Upload to begin transmission to the device. The
progress bar allows monitoring of the transfer.
Once the upload is complete, the new configuration is
activated. The time remaining is shown by the message going to
reset Reconnecting in ... seconds. When the upload is
completed successfully, the device reboots automatically.
SSL certificate
To work with an SSL connection, both sides of the connection
must have the appropriate certificates. Upload one or more
certificate files, one at a time, to the camera.
1.
Enter the full path of the file to upload or click Browse to
locate the file.
2.
Click Upload to start the file transfer.