Bosch ndn-921 用户手册

114 en | Operation via the browser

FlexiDomeHD 720p IP Camera

AR18-10-B013 | v1.52 | 2011.06

Installation and Operation Manual

Bosch Security Systems

Depending on the configuration of the unit, the alarm input and 

the relay output are displayed next to the camera image. The 

alarm symbol is for information and indicates the input status 

of the alarm input: Active 1 = Symbol lights, Active 0 = Symbol 

not lit. The relay on the camera allows the operation of a device 

(for example, a light or a door opener).

–

To operate, click the relay symbol. The symbol is red when 

the relay is activated.

The System Log field contains information about the operating 

status of the camera and the connection. These messages can 

be saved automatically in a file. Events such as the triggering or 

end of alarms are shown in the Event Log field. These messages 

can be saved automatically in a file.To delete the entries, click 

the icon in the top right-hand corner of the relevant field.

Individual images from the video sequence that is currently 

being shown on the Livepage can be saved in JPEG format on 

the computer's hard drive.

Discovery of storage not completed 

If the information about recorded video is not 

cached, a discovery procedure is started to find 

all recorded video. During this time, the discovery 

symbol is shown. While discovery is executed, 

gaps might be shown in places which the 

discovery has not yet reached. The gap is 

automatically replaced by the true video, when 

the correct information is available.