Bosch ndn-921 用户手册

FlexiDomeHD 720p IP Camera

Advanced Mode | en

Bosch Security Systems

Installation and Operation Manual

AR18-10-B013 | v1.52 | 2011.06

5.

Click one of the entries in the table to make changes. The 

entry is highlighted.

6.

Click Delete to remove the entry from the table.

7.

Choose other values from the list boxes under the table, to 

change the selected entry. Changes are immediate.

8.

If there are empty lines at the bottom of the table, for 

example after deletions, add new data by marking the row 

and selecting values from the list boxes.

9.

When finished, click OK to save and activate the table.

If a table is not created, there is no automatic switching. When 

editing the table, note that values occur in linked pairs (DST 

start and end dates).

The camera can receive the time signal from a time server using 

various time server protocols and then use it to set the internal 

clock. The device polls the time signal automatically once every 

minute. Enter the IP address of a time server.

Select the protocol that is supported by the selected time 

server. It is recommended to select the SNTP server protocol. 

This protocol provides high accuracy and is required for special 

applications and future function extensions. Select Time server 

if the server uses the RFC 868 protocol.

Various overlays or stamps in the video image provide 

important supplementary information. These overlays can be 

enabled individually and arranged on the image in a clear 

manner.

This field sets the position of the camera name overlay. It can 

be displayed at the Top, at the Bottom, or at a position of 

choice using the Custom option, or it can be set to Off for no 

overlay information.