Bosch ndn-921 用户手册

en | Advanced Mode

FlexiDomeHD 720p IP Camera

AR18-10-B013 | v1.52 | 2011.06

Installation and Operation Manual

Bosch Security Systems

If an iSCSI system is selected as the storage medium, a 

connection to the desired iSCSI system is needed to set the 

configuration parameters.

The storage system selected must be available on the network 

and completely set up. Amongst other things, it must have an IP 

address and be divided into logical drives (LUN).

1.

Enter the IP address of the required iSCSI destination in 

the iSCSI IP address field.

2.

If the iSCSI destination is password protected, enter this 

into the Password field.

3.

Click the Read button. The connection to the IP address is 

established. The Storage overview field displays the 

logical drives.

The supported local recording media is displayed in the storage 

overview field.

The storage overview displays the available storage media. 

Select individual media or iSCSI drives and transfer these to the 

Managed storage media list. Activate the storage media in this 

list and configure them for storage.

Each storage medium can only be associated with one user. If a 

storage medium is already being used by another user, 

decouple the user and connect the drive to the camera. Before 

decoupling, make absolutely sure that the previous user no 

longer needs the storage medium.

1.

In the Recording media section, click the iSCSI Media or 

Local Media tab to display the applicable storage media in 

the overview.

2.

In the Storage overview section, double-click the required 

storage medium, an iSCSI LUN or one of the other