Bosch ndn-921 用户手册

en | Advanced Mode

FlexiDomeHD 720p IP Camera

AR18-10-B013 | v1.52 | 2011.06

Installation and Operation Manual

Bosch Security Systems

system such as the Bosch Video Client or the Bosch Video 

Management System. The camera connects to all remote 

stations protected by the same general password. To define a 

general password:

1.

Select 10 in the Number of destination IP address list 

box.

2.

Enter 0.0.0.0 in the Destination IP address field.

3.

Enter the password in the Destination password field.

4.

Set the user password of all the remote stations to be 

accessed using this password.

Setting destination 10 to the IP-address 0.0.0.0 overrides its 

function as the tenth address to try.

If the device is operated behind a firewall, select TCP (HTTP 

port) as the transfer protocol. For use in a local network, select 

UDP.

Please note that in some circumstances, in the event of an 

alarm, a larger bandwidth must be available on the network for 

additional video images (if Multicast operation is not possible). 

To enable Multicast operation, select the UDP option for the 

Video transmission parameter here and on the Network page.

Select a stream to be transmitted.

Select a browser port, depending on the network configuration. 

The ports for HTTPS connections are only available if the On 

option in SSL encryption is selected.

If it is known which device is being used as the receiver, select 

the analog video output to which the signal should be switched. 

If the destination device is unknown, it is advisable to select the 

First available option. In this case, the image is placed on the 

first free video output. This is an output on which there is no 

signal. The connected monitor only displays images when an 

alarm is triggered. If a particular video output is selected and a