Behringer Pro Mixer DJX750 用户手册
4
PRO MIXER DJX750 User Manual
1. Control Elements
(1)
(3)
(2)
(5)
(4)
(27)
(28)
(29)
(17)
(32)
(32)
(31)
(30)
(16)
(33)
(34)
(18)
(35)
(36)
(19)
(37)
(20)
(26)
(25)
(24)
(23)
(22)
(21)
(15)
(14)
(13)
(12)
(6)
(11)
(10)
(9)
(8)
(7)
1.1 Stereo channels 1 to 4
(1)
Use the LINE/CD switch to select the input signal for channel 1. Unlike other
channels, channel 1 features two line inputs.
(2)
You determine the input signals for the channels 2 to 4 with the PHONO/CD
i.e. PHONO/LINE switch (channels 3 and 4). “Phono” is intended for
connecting a turntable. “Line” i. e. “CD” must be selected for all other signal
sources (e. g. CD or MD players). The input sensitivity of the phono input can
be switched to line level, allowing utmost flexibility (see
(41)
).
◊
Never connect devices with line level to the highly sensitive phono
inputs! The output level of phono pick-up systems is measured in
millivolts, whereas CD players and tape decks have levels measured in
volts, i.e. the level from line signals is up to 100 times higher than that
of the phono inputs.
inputs! The output level of phono pick-up systems is measured in
millivolts, whereas CD players and tape decks have levels measured in
volts, i.e. the level from line signals is up to 100 times higher than that
of the phono inputs.
(3)
The GAIN control in the CHANNEL section is used to adjust the level of the
input signal. The level meter
(5)
reads the input level.