Hanna Instruments hi 9064 用户手册

HI70605/2 Detachable interchangeable TFPC RH probe with 2 m

(6.6') cable and perforated cap (for HI 9065 only)

HI70605/5 Detachable interchangeable TFPC RH probe with 5 m

(16.5') cable and perforated cap (for HI 9065 only)

HI70607/2 Detachable interchangeable TFPC RH probe with 2 m

(6.6') cable and sintered cap (for HI 9065 only)

HI70607/5 Detachable interchangeable TFPC RH probe with 5 m

(16.5') cable and sintered cap (for HI 9065 only)

HI70608/2 Detachable interchangeable TFPC RH probe with 2 m

(6.6') cable (for HI 9064 and HI 9160 only)

HI70608/5 Detachable interchangeable TFPC RH probe with 5 m

(16.5') cable (for HI 9064 and HI 9160 only)

HI7101

Calibration chambers for probes with perforated cap,

complete with O-ring and precalibrated saturated salts

HI7111/P

Spare saturation salts 6 x 15 g bottles of LiCl for low

range humidity calibration

HI7121/P

Spare saturation salts 6 x 33 g bottles of NaCl for high
range humidity calibration

HI 710031 Hard carrying case
HI 721308 1.5V AA size alkaline battery (10 pcs)
MANRHWPR2

Instruction manual

FOR HI9065 ONLY

Interchangeable precalibrated temperature probes:
HI765AN

Air Temperature Probe

HI765FN

Surface Temperature Probe

HI765LN

Liquid Temperature Probe

HI765PN

Penetration Temperature Probe

HI9064, HI9065 and HI9160 are supplied with the advanced

"BEPS" Battery Error Preventive System technology that detects a low

power condition in the battery and prevents erroneous measurements
being taken due to low voltage.
For HI 9064 and HI 9065, upon depletion of the power in the
batteries up to a prefixed threshold, the LCD automatically switches

off.
For HI9160, when the batteries are low "V"

is displayed on the LCD to warn the user. This

is to inform the user that the display will be
shut-off after about 5 hours of use.
Battery replacement must only take place in a non hazardous area
using the battery types specified in this instruction manual (see page

13).

In order to replace rundown batteries, simply
remove the two screws on the rear cover of

the instrument and replace the four 1.5V AA

batteries with new ones, paying attention to
the correct polarity.

"BEPS" & BATTERY REPLACEMENT

ACCESSORIES