Ideal nd2396 用户手册

• Connect the black test probe to neutral and the red test

probe to the first phase (R or L1).

• Using the trigger to open the jaws, fully enclose the phase

(R or L1) within the clamp.  

• Release the trigger and be sure that the jaws have closed

completely.

• Wait until the reading is stable, and press the READ NEXT

button to capture the reading, storing the data in memory.

• The LCD display will show a flashing S to indicate that the

meter is ready for the next measurement.

• Remove the clamp and test probe from the first phase.

• Connect the black test probe to neutral and the red test probe

to the second phase (S or L2)

• Using the trigger to open the jaws, fully enclose the second

phase (S or L2) within the clamp.  

• Release the trigger and be sure that the jaws have closed

completely.

• Wait until the reading is stable, and press the READ NEXT

button to capture the reading, storing the data in memory.

• The LCD display will show a flashing T to indicate that the

meter is ready for the next measurement.

• Remove the clamp and test probe from the second phase.

• Connect the black test probe to neutral and the red test probe

to the third phase (T or L3)

• Using the trigger to open the jaws, fully enclose the third

phase (T or L3) within the clamp.  

• Release the trigger and be sure that the jaws have closed

completely.

• Wait until the reading is stable, and press the READ NEXT

button to capture the reading, storing the data in memory.

3Ø
KVAR
KVA

3Ø

3Ø