jetway 917pdcpr106 用户手册
42
3-10-1 Smart FAN Configurations
Phoenix – AwardBIOS CMOS Setup Utility
Smart FAN Configurations
Item Help
CPUFAN Smart Mode Enabled
CPU Temp1 Value 30
CPUFAN Speed above Temp1 60%
CPU Temp2 Value 40
CPUFAN Speed above Temp2 80%
CPU Temp3 Value 50
CPUFAN Speed above Temp3 100%
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
3-11 Miscellaneous Control
This section is for setting CPU Frequency/Voltage Control.
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Item Help
CPU Clock Ratio 8
Auto Detect PCI Clk Enabled
Spread Spectrum Disabled
** Current Host/PCI Clock is 133/33Mhz **
Host/PCI Clock at Next Boot 100
** Current DRAM Clock is 166Mhz **
DRAM Clock at Next Boot By SPD(DDR )
CPU Vcore Select Default
VDD1.5V Setting 1.55V
VRAM Settings 1.80V
VRAM Under Voltage Protect Disabled
VDD1.5V Under Voltage Protect Disabled
Flash Part Write Protect Enabled
Menu Level >
↑↓→←
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect PCI Clk
This item allows you to enable/disable auto detect PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host Clock at Next Boot
This item allows you to select CPU frequency step by step increasing.
The choice are: 533MHz CPU---133MHz~350MHz, 800MHz CPU---200MHz~350MHz
DRAM Clock at Next Boot
This item allows you select the DRAM Clock for DDR266/DDR333/DDR400. The setting are:
DDR333 for P4/533MHz CPU, DDR333 /DDR400 for P4/800MHz CPU
CPU Vcore Select
This item allows you select CPU Vcore Voltage by increase 0.0125V step by step from 0.8375V
to 1.6V or the Default setting is Default (CPU manufacturer Default setting).
This item allows you to enable/disable auto detect PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the CPU Host/PCI clock and Spread Spectrum.
The settings are: Enabled, Disabled.
Host Clock at Next Boot
This item allows you to select CPU frequency step by step increasing.
The choice are: 533MHz CPU---133MHz~350MHz, 800MHz CPU---200MHz~350MHz
DRAM Clock at Next Boot
This item allows you select the DRAM Clock for DDR266/DDR333/DDR400. The setting are:
DDR333 for P4/533MHz CPU, DDR333 /DDR400 for P4/800MHz CPU
CPU Vcore Select
This item allows you select CPU Vcore Voltage by increase 0.0125V step by step from 0.8375V
to 1.6V or the Default setting is Default (CPU manufacturer Default setting).