King Technology prevail feeder (english) 用户手册
Filter Installation
Apply teflon tape to each
threaded end of nipple.
threaded end of nipple.
Screw one end of nipple
into the filter return.
into the filter return.
Screw either side of
Cycler on to open nipple
end until upright and
secure.
Cycler on to open nipple
end until upright and
secure.
Tighten turning 1 to 2
revolutions with wrench.
DO NOT OVER TIGHTEN.
revolutions with wrench.
DO NOT OVER TIGHTEN.
HOSE
ADAPTER
HOSE
ADAPTER
HOSE ADAPTER
11
Tighten turning
1 to 2 revolutions with
wrench. DO NOT OVER
TIGHTEN.
1 to 2 revolutions with
wrench. DO NOT OVER
TIGHTEN.
Bi-flow valve
design allows
water flow in
either
direction.
design allows
water flow in
either
direction.
4.
5.
6.
1.
2.
3.
7.
MATERIALS NEEDED:
One
Hose
Clamp
Hose
Clamp
Corrosion Resistant
Check Valve
Check Valve
RECOMMENDED:
INCLUDED
WITH CYCLER:
WITH CYCLER:
Apply teflon tape to
threaded end of hose
adapter.
threaded end of hose
adapter.
Screw adapter into the
other side of Cycler.
other side of Cycler.
Attach return section of hose
to the adapter with clamp.
Tighten clamp with
screwdriver.
to the adapter with clamp.
Tighten clamp with
screwdriver.
TOOLS NEEDED:
Screwdriver
When using a Chlorine Pac,
installing a corrosion resistant
check valve is
recommended.
installing a corrosion resistant
check valve is
recommended.
Teflon Tape
One Hose Adapter
1 1/2" X 1 1/2" X 1 1/4"
1 1/2" X 1 1/2" X 1 1/4"
One 6" X 1 1/2" TBE
PVC Nipple
One Section of
1 1/2" Flex Hose
(provided with filter)
1 1/2" Flex Hose
(provided with filter)
Pipe Wrench