Kenwood DPX303MBT 业主指南
38
ENGLISH
(For
/
/
)
How to remove the unit
1 Fit the catch pin on the extraction keys into the holes on
both sides of the trim plate, then pull it out.
2 Insert the extraction keys deeply into the slots on each
side, then follow the arrows as shown on the illustration.
Do the required wiring.
( 39)
( 39)
Dashboard of
your car
your car
Bend the appropriate tabs to hold the
mounting sleeve firmly in place.
mounting sleeve firmly in place.
Installing the unit (in-dash mounting)
When installing without the mounting sleeve
Align the holes in the unit (on both sides) with the vehicle
mounting bracket and secure the unit with screws (supplied).
mounting bracket and secure the unit with screws (supplied).
* For
/
/
:
Remove the mounting sleeve and trim plate from the unit
before installing.
before installing.
Use only the specified screws. Using wrong screws might
damage the unit.
INSTALLATION/CONNECTION
(For
/
/
)
Installing in Toyota cars
Install onto the car brackets using screws (F) or (G) (supplied). Use the mounting holes (
) or (
) that fit the
car brackets. Then, install the supplied trim plate (C).
Do the required wiring.
( 39)
( 39)
Dashboard of your car
Car bracket
JS_KWD_DPX_793BH_KN_EN_3.indd 38
7/25/2017 10:40:08 AM