Audiovox Voxx MTG10UHD 业主指南
16
Installing the Mounting Bracket
1. Once all the pre-wiring is complete, locate:
t Mounting Bracket
t (4) #8 x 3/8” Self-Drilling Screws
2. Carefully align the Mounting Bracket in the location it is to be installed with direction
arrow facing the front of the vehicle (make sure there is nothing between the
Mounting Bracket and Roof Cross-Member).
Mounting Bracket and Roof Cross-Member).
NOTE: The headliner may need to be cut to install the bracket. When cutting the headliner,
make sure no wires above the headliner are cut.
make sure no wires above the headliner are cut.
3. While holding the Mounting Bracket in place, install the 4- #8 x 3/8” Self-Drilling
Screws.
CAUTION: Be sure that the Self-Drilling Screws do not pierce the outer roof skin when
fully fastened to the Roof Cross-Member.
Installing the Mounting Bracket
*
Self-Drilling Screws
Mounting Bracket
Headliner
Roof Cross-Member
Roof
(4 x Self-Drilling Screws - #8 x 3/8”)
Mounting Bracket
*
CAUTION: Use extreme caution when using the
Self-Drilling Screws to avoid damage to vehicle
roof or other components, wiring, etc.
roof or other components, wiring, etc.
Front
of
Vehicle
Bracket
Mounting
Holes
Mounting
Holes
(Top view of Bracket)
WARNING: Any use of a mounting substrate other than the supplied bracket may
result in performance issues. The supplied bracket was designed to ensure this
Mobile Video System is properly installed without adding any strain or stress to the
system which could result in unit operation problems.
result in performance issues. The supplied bracket was designed to ensure this
Mobile Video System is properly installed without adding any strain or stress to the
system which could result in unit operation problems.