Redline Communications Inc. AN100UA 用户手册
Red
MAX
™
Base Station
User Manual
Doc. #70-00058-01-01
Proprietary Redline Communications © 2007
July 13, 2007
Page 40 of 117
SF Info
Click the subscriber name listed in the
SS Info
screen to view service flow settings and
statistics.
Figure 18: Web: Monitoring - SS Info - SF Info Screen
SFID: Service flow identifier for this service flow.
Direction: Direction of service flow:
Direction: Direction of service flow:
Downstream: Downlink traffic from base station to subscriber.
Upstream: Uplink traffic from subscriber to base station.
Upstream: Uplink traffic from subscriber to base station.
State: Current state of the service flow.
Active: Service flow is currently active.
Authorized: Service flow configuration has been saved but is not active.
Edited: Service flow configuration is being edited and is not saved.
Provisioned: Subscriber has been deregistered.
Rejected: Base Station was not able to setup the service flow.
Requesting: Base Station is attempting to setup the service flow.
Authorized: Service flow configuration has been saved but is not active.
Edited: Service flow configuration is being edited and is not saved.
Provisioned: Subscriber has been deregistered.
Rejected: Base Station was not able to setup the service flow.
Requesting: Base Station is attempting to setup the service flow.
Provisioned Time: Time elapsed since this service flow became active.
CS Specification: Classification type associated with this service flow.
CS Specification: Classification type associated with this service flow.
802.3 Ethernet: The classifiers for this service flow are based on the combination of
the fields in the Ethernet packet's header.
IPv4: The classifiers for this service flow are based on the combination of the fields
in the packet's IP header.
802.1Q: The classifiers for this service flow are based on the combination of the
fields in the Ethernet packet's header and 802.1Q VLAN tag.
the fields in the Ethernet packet's header.
IPv4: The classifiers for this service flow are based on the combination of the fields
in the packet's IP header.
802.1Q: The classifiers for this service flow are based on the combination of the
fields in the Ethernet packet's header and 802.1Q VLAN tag.
Enable/Disable: Indicate the operator selected status for this service flow:
Enabled: Service flow is manually enabled by the operator.
Disabled: Service flow is manually disabled by the operator.
Disabled: Service flow is manually disabled by the operator.
Throughput Kbits/sec: Traffic throughput rate for this service flow.
Total Packets: Total packets exchanged with the subscriber (all service flows).
Reset: Click
Total Packets: Total packets exchanged with the subscriber (all service flows).
Reset: Click
Reset
to remotely reboot the selected subscriber.
Refresh: Click
Refresh
to update the screen with the latest totals.