Recsol I&C Co. Ltd. RECSPEED2021P 用户手册
in the VPI and VCI values provided by your ISP. Make sure the Framing is set to VC MUX
In the Select ADSL Mode section , select the mode(s) recommended by your ADSL service
provider. Click on the mode(s) required and then click ok
NOTE: The service mode type will be one of the following
ANSI T1.413 Issue 2
ITU G. 992.2 Annex A (G.lite)
ITU G. 992.1 Annex A (G.dmt)
8.
The previous Service Option window will appear, click Next.
9.
If prompted to insert your Windows CD do so at this time then click OK. Enter the <CD drive
Letter> and then :\Win98 (e.g. D:\Win98) and click OK.
10. At the conclusion of the RECSPEED-2021P ADSL NIC driver installation, click Finish.
11. For the PC system to set up the RECSPEED-2021P ADSL NIC, a system Restart is required.
Click Yes.
NOTE: After restarting the system, the Diagnostic Tool icon (See Appendix A) is
active and monitoring connectivity.
12. You must now make a dial-up network connection. At the Task bar, click on Start, and then select
Programs, Accessories, Communications, followed by Dial-Up Networking.
13. The Dial-Up Networking window appears. Double-click the Make New Connection icon.
14. The Make New Connection window appears. The default name for the computer you are dialing is
My Connection. However, You can name the connection anything you wish. In the Select a device
bar, use the scroll down menu to locate the RECSPEED-2021P ADSL PCI NIC, then click Next.
15. A new Make New Connection window appears. Enter in the Host Name or IP Address provided
by your ISP, otherwise enter (0) zero, and click Next.
16. Another Make New Connection window appears. It will indicate that You have successfully
created a new Dial-Up Networking connection called “My Connection”. Click Finish.
17. The new “My Connection” will appear in the Dial-Up Networking window. Double-click the new
“My Connection” icon to begin a Dial-Up session.
18. The Connect To window appears indicating “My Connection”. Type in the User name and
Password supplied by your Internet Service Provider (ISP). Click Connect.
19. The Connection Established window will appear indicating You are connected to “My
Computer”. Click Close and the Diagnostic tool icon appears on the task bar.