Recsol I&C Co. Ltd. RECSPEED2021P 用户手册
Bridged Ethernet over ATM (RFC 1483) – Windows NT 4.0
NOTE: To perform the installation, logon as Administrator. TCP/IP protocol must be installed prior to
the driver installation. At the Network window select the Protocols tab and verify that the TCP/IP is
present.
1.
At the desktop, double click My Computer, double click Control Pane l, double click Network
and then select the Adapte rs tab and click Add (to add new adapters).
2.
In the Select Network Adapter window click Have Disk.
3.
Insert the RECSPEED-2021P ADSL MODEM CD into your computers CD drive.
4.
The Insert Disk window appears. In the text entry bar type in your systems CD drive location letter
( D for example ), followed by a colon ( : ), then a back slash ( \ ), followed by the RFC1483 driver
for Windows NT 4.0 . For example, type in: D:\BEoA\NT4.0 Then click OK.
5.
The Select OEM Option window will find the RECSPEED-2021P ADSL PCI NIC. Click OK.
6.
When the Service Option window appears, click Advanced.
7.
The Service Options window appears indicating the Connection Address & select ADSL mode
Enter in the VPI and VCI values provided by your ISP. Make sure the Framing is set to
LLC/SNAP,
In the Select ADSL Mode section , select the mode(s) recommended by your ADSL service
provider. Click on the mode(s) required and then click ok
NOTE: The service mode type will be one of the following
ANSI T1.413 Issue 2
ITU G. 992.2 Annex A (G.lite)
ITU G. 992.1 Annex A (G.dmt)
8.
The previous Service Option window will appear, click Next.
9.
Then the Network window will appear, click Close.
10. The TCP/IP Properties window will appear and prompt the user for information. When not
connecting to a DHCP server, enter the IP address provided by your ISP.
11. Enter the Subnet Mask provided by your ISP
12. Enter the Default Gateway address.
NOTE: Consult your ISP for the TCP/IP Properties.
13. Select the DNS Configuration tab and enter the Host Name
14. Then enter the Domain Name (e.g. pacbell.net)
NOTE: Use the DNS Service Search and Domain Sufix Search to locate the Host Name and
Domain. Click Add to save the address. Repeat the process for additional DNS entries.
15. Click OK to update the changes.
16. The system must be restarted for the changes to take effect. Click Yes to restart.