Robotron Pty Ltd G5P 用户手册

The G3XXe receiver’s audio travels via the USB interface in a digitized form, 
to be played back by the sound card. The volume can be adjusted using the 
Wave volume slider (which must be unmuted) or the master Volume Control. 

The G3XXi receiver’s audio output is an analog Line Output. You can connect 
this directly to standard amplified speakers, an external amplifier of your 
choice, or your PC sound card. If you are using the sound card, the receiver 
output should be physically connected to the Line Input of the sound card. 

Double click on the speaker icon in the task bar, to bring up the sound card 
Volume Control panel: 
 

 

 

 

Make sure the Line Input is not muted, and the volume is set to approximately 
half, to get started.  (If the maximum volume as set on the receiver panel is not 
sufficient, you may wish to increase the sound card volume later.) 

If you are using the Microphone input instead of Line input, please check if 
there is an Advanced button under the Microphone volume control in the 
sound card control panel. If so, then click on it and uncheck the +20dB gain 
check box if it exists. (The extra large gain might result in overloading the 
sound card and cause distortion.) 

 

12