Robotron Pty Ltd G9P 用户手册

下载
页码 128
WiNRADiO G39DDC User’s Guide 
 
118 
Appendix D – Dealing with Interference  
Electromagnetic Interference (EMI) is what prevents us from receiving a 
clear signal, even when the receiver should be sensitive enough to receive it. 
There are many types of interference you can experience with radio receivers, 
emanating from both natural and man-made sources. 
Natural interference is produced by atmospheric phenomena such as storms 
and sun activity. 
Not so surprisingly, man-made interference is often worse. Sources include 
electric motors, power lines, passing cars, electrical welding equipment, 
fluorescent lights, domestic appliances, computer networks, etc. Receiving 
antennas should always be as far away from sources of electromagnetic 
interference as possible. 
One significant source of man-made electromagnetic interference is the 
personal computer. Since the WiNRADiO Excelsior receiver requires a 
personal computer to operate, this creates a potential paradox. The receiver 
itself is designed to be substantially immune to computer-generated 
interference. However, any receiver needs to be connected to an antenna, and 
antennas can’t discriminate between useful signals and interference. The 
interference from your computer can either radiate directly to the antenna, or it 
can be conducted to it along the outer conductor of the lead-in cable. Even in 
professional radio receiving stations, a lot of care and effort is always needed, 
if this type of self-interference is to be avoided.  
Some computers are worse than others in terms of generated electromagnetic 
interference. The specifics of a computer-based software-defined receiver 
require a careful consideration with respect to computer-generated noise. Over 
the past decade or so, computers have become considerably quieter in terms 
of radiated radio frequency interference (RFI). Replacing CRT monitors with 
modern LCD types has substantially contributed to this, as have strict FCC 
and CE requirements with respect to allowable levels of RFI for consumer 
products.  
To check this, tune to some of the interfering signals, then switch off the 
monitor and see if the signal disappears. If it does then you could continue 
using the WiNRADiO receiver, and live with the fact that some useful 
frequencies will be obscured by your monitor’s interference, or you can replace