Worthdata Inc B5001 用户手册

 

1

The components in your R/F Terminal system will vary according to the 
configuration of your system.  Your R/F Terminal shipment should contain at least: 

An R/F Terminal T7001 or LT7001 (unit includes keypad and 
display).  If the R/F Terminal is an LT7001 model, it will have an 
integrated laser scanner built-in to the body of the terminal. Each 
terminal is shipped with a shoulder strap, boot, and Setup Menu. 

An optional Scanner – if you ordered the T7001 model instead of the 
LT7001 model with the built-in laser scanner. 

USB Cable – for programming and voice prompt upload. 

5V Power Supply – battery charger with adapter cable. 

Utilities CD ROM – demo programs, DLL, and firmware loader program 

If Base Stations were ordered with your system, you should receive at least: 

A Base Station (B5001) including a 5v power adapter for each. 

A Serial Cable (F34 or F36) or USB cable. 

Keep the shipping box for the R/F Terminal in the event it is necessary to 
return equipment for repair later. 

Start with one Terminal and Base Station. Get everything working 
with the single terminal and base and then add other terminals, being 
certain that all terminals have unique Terminal IDs. 

All equipment is shipped with the default setting of Channel 0, Terminal 
ID 0.  Unless you have other Terminal/Base configurations already 
operating on that channel, you probably don’t need to change the 
channel.  

Without attaching the Base Station to the computer, and with only the 
power supply plugged in the base, you can perform a site test to be sure 
you have adequate coverage and the radios are working perfectly. (See 
Chapter 4). 

Now connect the Base Station to the computer’s serial or USB port. Be 
sure to turn OFF all handshaking on the COM port used; in Windows, go