Omnitron iConverter RS232 8763-2-Z 产品宣传页
产品代码
8763-2-Z
Ordering inFOrmatiOn
Page 2
800-675-8410 • 949-250-6510 • www.omnitron-systems.com • info@omnitron-systems.com • 140 Technology Dr. Irvine, CA 92618
iConverter
RS232
© 2010 Omnitron Systems Technology, Inc. All rights reserved. iConverter and NetOutlook are Registered Trademarks of Omnitron Systems Technology, Inc.
Trademarks are owned by their respective companies. Specifications are subject to change without notice.
091-18760-001E
9/10
speciFicatiOns
management
Management is accomplished by using management module
that provides monitoring, remote configuration and trap
notification. The management module can be accessed
via SNMP, Telnet and via a serial port. The SNMP-based
management is accomplished via Omnitron’s intuitive, graphic-
oriented NetOutlook management software or third party SNMP
management software. Management via the Telnet and the
serial interfaces have an easy-to-use, menu-driven interface.
Some of the RS232 parameters that can be monitored include
Some of the RS232 parameters that can be monitored include
fiber link status, module’s model and description, hardware
and software revisions, serial number and a user-defined
identifier.
Remote configuration of the RS232 module enables DTE
Remote configuration of the RS232 module enables DTE
or DCE selection and Fiber Loopback test, and is capable
of overriding of physical DIP-switch settings. In case of
power removal, the configuration can be reloaded from the
management module.
In addition to all standard iConverter SNMP traps such as
In addition to all standard iConverter SNMP traps such as
module insertion and removal, the RS232 modules can
generate traps on port state changes including link-up and link-
down. Trap monitoring of specific events can be selectively
enabled or disabled by the network administrator.
Model Type
RS232
Protocols
Asynchronous Serial RS-232
Copper Connectors
DB-9 Female or
Terminal Block
Fiber Connectors
ST, SC, MT-RJ, LC
Controls
DTE/DCE, Fiber Loop-Back
LED Displays
Power, Test, Fiber Lnk/Act,
DTE, DCE, Serial Act
Dimensions
W:0.85" x D:4.5" x H:2.8"
Weight
8 oz.
Compliance
UL, CE, FCC Class A
Power Requirement
0.5A @ 3.3VDC (typical)
Temperature
Standard: 0 to 50º C
Wide: -40 to 60º C
Storage: -40 to 80º C
Humidity
5 to 95% (non-condensing)
Altitude
-100m to 4000m
MTBF (hrs)
850,000
Model Type
Fiber /
Media
Type
Distance
Connector Types
Tx
Wavelength
(nm)
Rx
Wavelength
(nm)
Min. Tx
Power
(dBm)
Max. Tx
Power
(dBm)
Min. Rx
Sense
(dBm)
Max. Rx
Power
(dBm)
Link
Budget
ST
SC
MT-RJ
LC
RS232
Dual Fiber
MM
5km
8760-0
8762-0
8764-0
-
1310
1310
-24
-14
-31
-14
7
SM
30km
8761-1
8763-1
8765-1
8767-1
1310
1310
-15
-8
-31
-8
16
SM
60km
8761-2
8763-2
-
8767-2
1310
1310
-5
0
-31
-3*
26
SM
120km
-
8763-3
-
8767-3
1550
1550
-5
0
-31
-3*
26
RS232
Single-Fiber
SM
20km
-
8770-1
-
-
1310
1550
-15
-5
-30
-3
15
SM
40km
-
8770-2
-
-
1310
1550
-8
0
-30
-3*
22
SM
20km
-
8771-1
-
-
1550
1310
-15
-5
-30
-3
15
SM
40km
-
8771-2
-
-
1550
1310
-8
0
-30
-3*
22
For wide temperature (-40 to 60ºC), add a "W" to the end of the model number. Consult factory for extended temperature (-40 to +75ºC) models.
When using single-fiber (SF) media converter models, the Tx wavelength on one end has to match the Rx wavelength on the other.
When ordering module with terminal block serial port, append 'T' before the dash '-' in the part number. Examples: 8760T-0, 8763T-3, 8770T-1
*A minimum of 3dB of attenuation is required for these models.