Rambo Industrial Limited BTR006 用户手册

‹ 

Every time the receiver is turned on, it will automatically connect to last 
connected device. If you want to pair it with other devices, please turn 
off the Bluetooth function of last connected devices first and pair the 
receiver with the new device according to steps 1～6 mentioned above. 

‹ 

When the reveiver is turned on and doesn’t connect to any devices, press 
MFB button twice, it will automatically connect to the last connected 
device. 

‹ 

When the receiver and the mobile phone are out of effective range to 
disconnected, they can connect to each other automatically once going 
back to effective range. 

‹ 

If the Bluetooth version of your mobile phone is V2.1 or above, it will no 
need to enter PIN No. when the receiver pairs with the mobile phone. 

 
 
Pairing with Bluetooth transmitter 
You can connect the receiver with a Bluetooth transmitter to enjoy music 
wirelessly. Hereby take BTT010 (Bluetooth transmitter for iPod, not 
included) for example. The pairing procedures are as follows: 
1)  Place the receiver and the Bluetooth transmitter where they are easily 

viewable by no more than 1 meter apart; 

2)  Enter the receiver’s pairing mode (Please refer to “How to enter pairing 

mode); 

3)  Turn on the Bluetooth transmitter. It will automatically search for 

Bluetooth devices and send a pairing request; 

4)  When the receiver requests to enter a PIN No., the transmitter will 

response “0000” automatically; 

5)  After successful pairing and connecting, blue LED of the receiver will 

flash twice quickly every 5 seconds. 

 
 
 
 
 
Remarks:  

‹ 

The pairing password of the receiver is “0000”. So, the receiver can only 
pair with a Bluetooth transmitter whose pairing password is “0000”. 

‹ 

If pairing still fails after several tries, please refer to the Bluetooth 
transmitter’s user’s manual for further information.