Silex SX-550-0700 E1038 用户手册
产品代码
E1038
Installing the SX-550 Module
To install the SX-550 module in the SX-550-6900 Evaluation Daughtercard:
1. Using the 40-pin OEM header, plug the SX-550 Module in the SX-550-6900 Evaluation Daughtercard
1. Using the 40-pin OEM header, plug the SX-550 Module in the SX-550-6900 Evaluation Daughtercard
and secure with screws, nuts and spacers. Important: The spacers MUST be installed to avoid
potential damage to the boards.
potential damage to the boards.
Figure 3 SX-550 Module Inserted in Daughtercard (SX-550-1701 WLAN version shown)
2. If you are installing a SX-550 WLAN model, plug the main antenna cable into the Primary Antenna
Connector on the card (see picture below). If needed, plug the auxiliary antenna cable into the
Auxiliary Antenna Connector.
Auxiliary Antenna Connector.
Figure 4 Antenna Connectors
Part Number 40183-101
Silex SX-550 Developer's Guide
Page 7
IMPORTANT: If you are only using a single antenna, you MUST connect this antenna to the Primary Antenna
Connector.
Connector.