Roseman Engineering Ltd. 2288 用户手册
998 Old Eagle School Road, Suite 1215
|
Wayne, Pennsylvania 19087
|
T: 610-225-8350
|
F: 610.971.9447
|
www.assetworks.com
64
15.1.2
Connect the FJ3 to the J1708 CAB Connector
If the vehicle has a 6-pin Deutsch connector, perform the following:
1. Run a twin-wire cable from the vehicle connector to the FJ3.
2. Connect the J1708 Data link (+) wire from pin A of the Deutsch connector.
3. Connect the J1708 Data link (-) wire from pin B of the Deutsch connector.
1. Run a twin-wire cable from the vehicle connector to the FJ3.
2. Connect the J1708 Data link (+) wire from pin A of the Deutsch connector.
3. Connect the J1708 Data link (-) wire from pin B of the Deutsch connector.
Note
Optional Power Supply Connection
The power supply can be connected to FJ3 from the J1708 CAB
connector, if pin C provides 12 – 24 volts with the ignition in the off
position:
connector, if pin C provides 12 – 24 volts with the ignition in the off
position:
- Connect Pin C to BATT (+) on the FJ3.
- Connect Pin E to BATT (-) on the FJ3.
Figure 9: Wiring Diagram for FJ3 to J1708CAB (6 pin) connector
RID-FG3-04-AW