Triplett 310-C 3022 用户手册

This tester has been designed with your safety in mind.
However, no design can completely protect against in-
correct use.  Electrical circuits can be dangerous and/
or lethal when lack of caution or poor safety practices
are used.

This meter is NOT to be used to measure High Energy

circuits (power circuitry fused at greater than 4KW, such

as distribution circuits, power entrance circuits, etc.) or

circuits classified by CE as CATEGORY III (CAT III).

•  Read all instructions in this manual before using this meter.

•  Prior to using this meter in any situation which could result
   in injury to the user, in order to verify that the meter is
   functional and producing a valid reading, test the meter on
   a circuit(s) known to have potentials equivalent to the
   potential that is to be measured. For example, before using
   the meter to determine if an AC power line is energized with
   120VAC, test the meter on a line known to be energized
   with 120VAC.

•  Do not exceed the maximum voltage limitations of this
   meter (see product specifications). Doing so may damage
   the meter and/or injure the user.

•  When using this meter in schools and workshops,
   responsible teachers or skilled personnel must control the
   usage of this meter.

•  Follow the recommendations of any Trade Organizations or
   Regulatory Agencies whose scope encompasses the use
   of this meter.