Toshiba CTX IPT/DKT 用户手册

You can conference together up to eight parties (including your own) - with up to six 
parties being external network lines. The actual number of conference parties with 
acceptable volume levels depends on the local and far end telephone line conditions.

The person who initiates the conference call is the Master. If, after the conference is 
established and the Master exits the conference, the first station to have been added to 
the conference becomes the Master.

1. While on a call, press 

Cnf/Trn

. You hear dial tone and your Line LED flashes green.

2. Call another station or outside line.

3. When the called party answers, press 

Cnf/Trn

. If you receive a busy tone or no 

answer, press 

Cnf/Trn

 again to return to the original connection.

All parties are conferenced. If the second call was placed on a 

Line

 that appears on 

your telephone, the LED also flashes green.

4. Repeat the above steps to add lines to the conference. Keep in mind the maximum 

number of allowed conference parties.

When the “master” of the conference hangs up, the control is automatically 
transferred to the first internal station added to the conference call. If no other 
internal stations are included in the conference call, the call will be 
disconnected.

1. Do Steps 1 and 2 above to add the line to which you wish to transfer conference 

control. See previous Note.

2. Announce the call and hang up to transfer it. This station now becomes the 

conference “master” with the ability to add or delete parties.

If you are the Conference Master, press the 

Hold

 button once (or twice for 

Executive Hold) to place the conference call on hold. The other parties can 
continue with the conference. Music-on-hold is suppressed and your extension 
LED flashes green. You can rejoin the conference at any time by pressing your 
extension button. When you return, you retain Master status.