Toshiba CTX IPT/DKT 用户手册

Speed Dial (SD) enables you to dial a sequence of up to 32 digits with a shorter code. 
Dial sequences can include telephone numbers, authorization codes, passwords 
feature activation codes and pauses. Speed Dial may be used to originate a call or 
invoked after a call is established. There are two types of Speed Dial: 

•

Station SD – Your System Administrator allocates a block of up to 100 personal 
SD numbers (10 per telephone). You have exclusive use of them and you can 
create and change them from your own telephone.If you have a IPT3014 telephone, 
you can assign names to your station SD numbers to appear on the Personal SD 
Directory display (see your System Administrator or use the procedure for 

.)

•

System SD – All telephones in your system can share a list of up to 800 System 
Speed Dial numbers under the exclusive control of the System Administrator. In 
some cases, System Speed Dial enables you to reach numbers that you would not 
be allowed to dial directly from your telephone.

There are two ways to begin a Speed Dial Call.

1. Press 

Spdial

 on a DKT3000/3200-series digital telephone

...or press the 

*

 button on any telephone.

2. Dial the Station or System Speed Dial Number. Station Speed Dial numbers 

occupy numbers 100~199. System Speed Dial numbers occupy numbers 200~999.

Station

1

1. Stations must be assigned/enabled Speed Dial capabilities in system programming by an 

Administrator in Program 200-30 (System SD) and Program 200-35 (Station SD).

Spdial

2

 

+

 nnn 

nnn = 100~199 Station SD bin numbers

2. If your telephone does not have a 

Spdial button, press the 

*

 button, then dial the three digit 

Speed Dial bin number (nnn).

System

1

Spdial

2

 

+

 nnn 

nnn = 200~999 System SD bin numbers